Add a Roof Inspection to Your Fall To-Do List

Your roof is one of the most critical parts of your home, yet many homeowners don’t think about it until there’s a problem. That’s why I recommend conducting a thorough roof inspection twice a year, ideally in the spring and fall. If there are any issues now, the cold and snow of winter could turn a small problem into a major headache.

Start with a Visual Check

Take a good look at your roof. Do the shingles appear to be in good shape? Is there any sagging or discoloration? Dark spots on the exterior or ceiling cracks and yellowing inside your home can be red flags signaling roof deterioration. Addressing these issues early can save you from costly repairs down the road.

Consider the Age of Your Roof

The lifespan of most roofs is around 20 years, but that can vary depending on the quality of installation, insulation, and ventilation. A well-installed roof with proper insulation and ventilation can last longer, but if your roof is approaching or has surpassed the 20-year mark, it’s time to consider a replacement. This is especially important if you’ve recently bought your home or are planning to purchase one. Knowing the age of the roof can help you plan for future maintenance or replacement.

Check for Shingle Damage

Are your shingles curling, splitting, or falling off? This kind of wear and tear often comes with age and exposure to the elements. Damaged shingles make your roof more vulnerable to leaks, which can lead to significant damage inside and outside your home. Look at where your downspouts deposit water—if you notice a lot of granules on the ground, it’s a sign that your shingles are deteriorating and may need to be replaced.

Watch for Moss and Mold

Moss or mold growth on your roof can be more than just a cosmetic issue. While it might be something a good cleaning can fix, it could also indicate trapped moisture and rotting plywood beneath the shingles. A professional inspection can help you determine if it’s a simple cleaning job or if more extensive repairs are needed.

Inspect Your Ceilings for Water Damage

If you notice yellowish-brown stains or cracks on your ceilings, it could be a sign of water damage coming from your roof. This is an issue you don’t want to ignore. Leaks tend to worsen over time, leading to more extensive and costly damage. Addressing them early can prevent a minor issue from becoming a major one.

Get a Professional Opinion

If you’re unsure about the condition of your roof, many roofing professionals offer free inspections. A qualified roofer can assess your roof’s current state and give you an estimate of how much longer it might last. One of the most common reasons roofs fail prematurely is poor ventilation and insulation, which can lead to early aging and rot. A good roofer will explain your options and help you make the best decision for your home.

If you need a roof inspection or any home improvement advice, don’t hesitate to reach out. A little preventative maintenance now can save you a lot of time, money, and stress later on.

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. For questions, email info@odonnellbros.com with the subject line “Ask the Pro.” Questions may be selected for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visitwww.odonnellbros.com. Advice is for guidance only.

Ceiling Cracks - A Cautionary Tale

After nearly 50 years in the remodeling business, I've seen my fair share of scary stuff inside people's houses. Some of these stories might hit home for those of you who put off fixing problems because you're afraid of what you might find. While big issues can be a pain and expensive, letting them go can lead to even bigger headaches down the road—and could even mess with your health.

One summer, I got a call from a woman in Bristol who said her roof was leaking. It was seemingly normal, except that it hadn’t rained in a month. I mentioned this to her, and she said, "I don't know where the water’s coming from, but my dining room ceiling just caved in."

I headed over to her house right away. Sure enough, there was a pile of sheetrock and plaster on her front lawn. Inside, the ceiling had completely collapsed, leaving a soggy mess all over her dining room.

I asked to see the bathroom on the second floor, but there wasn’t one. So, I climbed into the attic and was hit by a blast of intense heat. I also saw two air conditioning units running full blast in the dining room windows. The homeowner said she kept them on constantly because the top floor was so hot.

It didn’t take long to figure out why her ceiling fell in. The attic had no insulation or ventilation, turning it into an oven. The homeowner tried to cool things down by cranking the A/C, which created major condensation in the walls and ceiling.

When hot and cold air meet, they create moisture that seeps into plaster, sheetrock, and wood. That moisture leads to mold that literally eats away at the ceiling and walls. Her 1950s Cape Cod home, like many in our area of Connecticut, had poor insulation and ventilation, making it prone to rot. Ceiling cracks were the first sign of trouble. Instead of calling me then, her husband tried to cover them up with those 12x12 ceiling panels you see in doctor's offices. Nice try, but all it did was add another layer for moisture to soak into.

Here’s the bottom line: if your home has temperature issues, don’t ignore them. Deal with the humidity and moisture before it turns into major structural damage or worse. If that’s not enough to convince you, mold and mildew are big culprits behind asthma and breathing problems, especially for kids and the elderly. Is it worth risking your family’s health?

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company since 1975. Got a question for Bob? Email him at info@odonnellbros.com with "Ask the Pro" in the subject line. Your question might be featured in a future post. Need remodeling help? Call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Remember, advice is just for guidance.

Waterproofing Your Chimney

With recent summer rainstorms bringing unexpected downpours, homeowners need to pay extra attention to their chimneys. A chimney can be a hidden source of leaks and damage if not properly maintained. Waterproofing your chimney is essential to protect your home from moisture damage, ensuring it remains safe and sound throughout the year. Here’s a step-by-step guide to help you waterproof your chimney effectively.

Why Waterproof Your Chimney?

Chimneys are exposed to the elements year-round, making them susceptible to water damage. Bricks and mortar can absorb water, leading to deterioration over time. This process can cause cracks, spalling (flaking of the brick surface), and even structural damage. Waterproofing your chimney not only prevents these issues but also extends its lifespan, saving you money on potential repairs.

Assess the Current Condition

Before you begin waterproofing, inspect your chimney for any existing damage. Look for cracks, loose mortar, or spalling bricks. If you find significant damage, it’s best to have a professional mason repair these issues before proceeding with waterproofing. Minor cracks and gaps can be filled with a high-quality chimney sealant.

Clean the Chimney

A clean surface is crucial for effective waterproofing. Remove any dirt, moss, or debris from the chimney using a wire brush and a garden hose. For stubborn stains, a mild detergent solution can be used. Ensure the chimney is completely dry before applying any waterproofing products.

Choose the Right Waterproofing Product

There are various waterproofing products available, but not all are suitable for chimneys. Opt for a breathable, water-repellent solution designed specifically for masonry. These products allow water vapor to escape from the brick while preventing liquid water from penetrating the surface.

Apply the Waterproofing Solution

1. Preparation: Wear protective gloves and eyewear. Cover the surrounding area to protect it from overspray.

2. Application: Using a pump sprayer or a paintbrush, apply the waterproofing solution evenly across the entire chimney surface. Start from the bottom and work your way up to ensure complete coverage. Be generous with the application, but avoid over-saturating any area.

3. Second Coat: After the first coat has dried (usually within a few hours, depending on the product), apply a second coat for added protection.

4. Drying Time: Allow the chimney to dry thoroughly. Check the manufacturer’s instructions for specific drying times, but typically, it takes about 24-48 hours for the solution to cure completely.

Regular Maintenance

Waterproofing is not a one-time fix. Inspect your chimney annually, especially after heavy rainstorms, to ensure the waterproofing is intact. Reapply the waterproofing solution every 5-7 years, or as recommended by the product manufacturer.

Waterproofing your chimney is a straightforward task that can save you from costly repairs and headaches down the line. However, this project should only be done if you’re completely comfortable on a roof and using a ladder. If this kind of home maintenance task isn't something you do regularly, it’s a good idea to call a professional. No home improvement job is worth a trip to the emergency room. 

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.