Contact Us

Please feel free to get in touch to ask a question, schedule an appointment or give us your feedback. We look forward to hearing from you. 

17 Divinity St
Bristol, CT, 06010
United States

8605895155

Since 1975, O'Donnell Bros has been providing greater Bristol and Central Connecticut with residential and commercial remodeling solutions. We specialize in roofing, siding, windows, doors, gutters, downspouts and so much more. We look forward to helping you with all your remodeling needs. 

HomeImprovement-PT-050114_9032 (1).jpg

Articles

O'Donnell Bros President, Bob O'Donnell, is a regular contributor to The Bristol Press. Read his home improvement articles here.

 

Filtering by Tag: overflow

Spring Gutter Protection Cuts Down Maintenance All Year Long

Chelsea O'Donnell

While most people think about gutter cleaning in the autumn, the falling of spring blossoms also causes clogging that can create overflows and inadequate rainwater drainage. 

Gutters have come a long way in the past few years. Back when many of the homes in this area were built, open gutters were used to collect precipitation off the roof and deposit it onto the ground through a system of downspouts. Open gutters, however, allow not only water but leaves, whirlybirds, blossoms, and sticks to also fall into the gutter, clogging them up and eventually causing overflow without regular cleaning.

Gutter cleaning keeps me busy, mainly because it’s a dirty job that can also be dangerous if you’re not used to working on a ladder. Luckily, over the past few years, gutter manufacturers have smartened up, creating shields to install over your current gutters, as well as closed gutter systems that can replace your current setup.

Gutter guards come in a variety of materials and sizes, but they are all designed to maximize water flow through while keeping tree debris out of the channel. The least expensive option is steel mesh screens which slide in and sit above the gutter lip itself. The arch design helps to ensure that debris can’t get stuck in the back of the gutter and they generally come with a five-year warranty against rusting or corrosion.

A step up from mesh screens is a heavy-duty aluminum option that can be fitted from the front and back, avoiding the need to remove roof shingles for installation. These products come with a ripple design to prevent leaves from drying on the surface and they are generally backed by a 20-year warranty so you don’t have to worry about replacing often. I like these because the design strengthens the gutter which comes in very handy during major snowstorms when many homes in the area suffer from heavy and dangerous ice dams.

Finally, there is Leaf Relief, a heavy aluminum gutter shield that can drain nearly 30 inches of rainfall in one hour, which is 15 inches more than the highest rainfall ever recorded (for inquiring minds, that’s 12 inches in one hour in Holt, Missouri). For homeowners who want no maintenance, this is the gutter product for you. The 25-year no-clog, no-overflow warranty gives it the same lifespan as a new roof and the inset design makes it invisible from the road. Best of all, dry debris blows away with only a six-mile per hour breeze.

No matter what type of gutter guard you choose, you want to make sure that it’s the best product for your home. While any gutter guard will reduce debris getting into your gutter, the right guard will depend on the trees in the area, how much rainfall you get, the position of your home, and the size and age of your current gutters. Once those factors are taken into consideration and the appropriate product is chosen, you can say goodbye to messy cleaning and enjoy less maintenance at your home.

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.

Maintain Your AC Unit for a Cool, Cool Summer

Chelsea O'Donnell

The summer heat and humidity can be a killer, and if you’re like most homeowners you simply crank up the air conditioning when the weather gets too hot to handle. Unfortunately, an overflow of cold air can put your home at risk, and I don’t just mean your energy bills. Just this past week I have had a dozen calls from homeowners in the area whose exuberance for A/C has turned into a leak, damaging internal walls and ceilings and leaving a heck of a mess to clean up. So if you’re inclined to keep those A/C units on heavy rotation, follow these tips to ensure that your home stays protected for the rest of the summer.

Keep the filter clean.

A dirty filter can cut your air conditioner’s efficiency in half, so be sure to replace or wash it at least once a month during the summer. Not only will a clean filter enable more cold air to come out of the unit, it will also decrease the amount of pollen, dander, and even mold that you could be breathing in. Many people don’t know that air conditioning units are rated by their MERV, which stands for minimum efficiency reporting value or, more simply, the effectiveness of the filter. MERV ratings are between one and 20, with most home air conditioning units rating between one and 12. If you’re in the market for a new filter, choose one at the top of the scale as they can trap smaller particles and protect your home from mold spores, dust mites, and other nasty contaminants.

Make sure the window is leak free.

Window A/C units are tough to fit and often result in large gaps where the hot air outside can come in. Make sure all the space around the air conditioner is sealed up tight with foam for bigger gaps or simple foil tape for smaller areas. The materials you’ll need can all be found at the local hardware store and you’ll be shocked by the difference in air temperature by just plugging up those leaks.

Run the unit on a timer.

There is no point in running your A/C on high when you’re at work or away for the weekend. A digital timer will lower the unit’s output when you’re not at home, and then bring the house to a comfortable level by the time you walk in the door. By programming a timer to your preferences you can lengthen the life of the unit and lower your energy bills without noticing a difference in the level of comfort. If your air conditioner doesn’t have a timer, you can get one for as little as $10 online or at the home improvement store in your neighborhood.

Up your insulation.

If your attic isn’t properly insulated, it’s going to be a sauna up there. You don’t even need to go up to check - you can tell simply by touching your ceiling. If it feels hot, then imagine how hard it is for a window unit or even central A/C to compete with all that heat. A well insulated and ventilated attic will ensure that the hot air can escape while keeping the cool air circulating in the living areas of the home. Plus, proper insulation comes in mighty handy during the cold months of the year.

Watch for leaks.

Central air conditioning units are notorious for leaks for three reasons: a cracked or broken drain pan, a clogged air filter or a plugged up condensate line. If water can’t drain properly, it will end up in your ceiling or walls which can cause serious and expensive damage. If you see even the smallest leak, shut down the unit and inspect these three areas. A simple fix might save you thousands in damage if you act quickly.

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.