Give Windows a Spring Clean

Window washing is a dreaded task that most homeowners don’t bother doing it. But there is nothing like clean glass to help bring the outdoors in and make your house feel really clean. If it has been a while since you gave your windows some love, here are ten of my favorite tricks, tips, and hacks to simplify the job and get your glass gleaming again.

1. Never clean windows when it’s too cold or too warm. A cloudy, overcast day is your best bet for this job. 

2. Instead of relying on reams of paper towels, stop into your local hardware store and grab an eight-inch squeegee for those small panes. They make the job a lot easier with much less waste.

3. Don’t forget to wipe your squeegee blade between swipes to remove access cleaning solution and dirt. Otherwise you’ll just be spreading it around.

4. Here is a great DIY window cleaning solution. Combine one cup of hot water and one cup of white distilled vinegar. Mix in a spray bottle and there you have it. For very grimy windows, clean with hot soap and water first, followed by the vinegar mixture for a nice shine. 

5. To get rid of really pesky streaks, use a dryboard eraser. Unlike paper towels, an eraser can do away with streaks without leaving lint behind. 

6. If you really hate washing windows, take an extra step, and apply a window protectant. The clear polymer coating will help protect the glass from dust, dirt, and grime for longer. 

7. Hard water spots can be tough to remove with a regular window cleaner. A dryer sheet will do the trick, just buff in circular motions. It works on mirrors and shower doors too. 

8. Caterpillars love building nests in window tracks. Clean them out with a thin screwdriver and then follow up with a firm, toothbrush-sized bristle brush. 

9. Hate cleaning blinds? Wrap a pair of kitchen tongs in two microfiber cloths and secure them with an elastic band on either side. Run the tongs between each slat to remove dust and pet dander. 

10. Have a can of WD-40 in the garage? A quick coat on freshly cleaned window sills will prevent dirt and grime from sticking.

If you swear that this round of window washing will be your last, consider upgrading to vinyl windows. The seamless, tilt-in design makes them so easy to clean and they are energy efficient too. It’s one of the best upgrades you can make to your home to save both time and money in the long run. 

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visithttp://www.odonnellbros.com. Advice is for guidance only.

10 Easy Tips To Keep Windows Clean and Streak-Free

Window washing is such a dreaded task that most homeowners don’t bother doing it. But there is nothing like clean glass to help bring the outdoors in and make your house feel really clean. If it has been awhile since you gave your windows some love, here are ten of my favorite tricks, tips, and hacks to simplify the job and get your glass gleaming again.

1. Never clean windows on a hot day. The glass will heat up, causing your washing solution to dry on the panes faster than you’ll be able to wipe it off. A cloudy, overcast day is your best bet for this job. 

2. Instead of relying on reams of paper towels, stop into your local hardware store and grab an eight-inch squeegee for those small panes. They make the job a lot easier with much less waste.

3. Don’t forget to wipe your squeegee blade between swipes to remove access cleaning solution and dirt. Otherwise you’ll just be spreading it around.

4. Here is a great DIY window cleaning solution. Combine one cup of hot water and one cup of white distilled vinegar. Mix in a spray bottle and there you have it. For very grimy windows, clean with hot soap and water first, followed by the vinegar mixture for a nice shine. 

5. To get rid of really pesky streaks, use a dry board eraser. Unlike paper towels, an eraser can do away with streaks without leaving lint behind. 

6. If you really hate washing windows, take an extra step, and apply a window protectant. The clear polymer coating will help protect the glass from dust, dirt, and grime for longer. 

7. Hard water spots can be tough to remove with a regular window cleaner. A dryer sheet will do the trick, just buff in circular motions. It works on mirrors and shower doors too. 

8. Caterpillars love building nests in window tracks. Clean them out with a thin screwdriver and then follow up with a firm, toothbrush-sized bristle brush. 

9. Hate cleaning blinds? Wrap a pair of kitchen tongs in two microfiber cloths and secure with an elastic band on either side. Run the tongs between each slat to remove dust and pet dander. 

10. Have a can of WD-40 in the garage? A quick coat on freshly cleaned window sills will prevent dirt and grime from sticking.

If you swear that this round of window washing will be your last, consider upgrading to vinyl windows. The seamless, tilt-in design makes them so easy to clean and they are energy efficient too . It’s one of the best upgrades you can make to your home to save both time and money in the long run. 

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.

Get Rid of That Funky Roof Mold

Have patterns of strange, streaky stains appeared on your roof this spring? My phone rings off the hook for roof cleanings this time of year, and as I drive around town, I see so many houses decorated with unsightly roof residue, which frequently emerges during the April rainy season. But what are the stains, why have they suddenly popped up, and what can you do to get rid of it? They are all good questions, so let’s get you some answers.

Stains on the roof are generally algae, which gets carried by wind or birds from roof to roof, and may not be visible until they have enough moisture, heat, and humidity to grow and spread. The manifestation of an algae problem is those black streaks that you see. Now don’t be too alarmed, algae isn’t necessarily going to ruin your roof immediately, but it does affect the curb appeal of your home and the problem could end up damaging and pulling up your shingles if not dealt with for a long period of time.

An interesting fact is that copper, zinc, and lead are toxic to algae, and many newer roof shingles contain copper granules, which act as a barrier against any mold growth. Homes with older roofs won’t benefit from this technology, but it explains why you won’t see algae where metal flashing has been installed. If you’re susceptible to algae and in the market for a new roof, be sure to inquire about this type of shingle.

So now that we know what it is, how do we get rid of it? The easiest way to rid your roof of algae is a good cleaning solution, which can be picked up at the hardware store, applied using a pump sprayer and rinsed with the garden hose. One tip is to give any plants below the roof a good drink of water beforehand so they don’t absorb the solution. If you’re not comfortable on a ladder, call a professional to help you complete this task. A clean roof isn’t worth a trip to the hospital, and a local area home improvement specialist will be able to complete the job in just a few hours.

Once the roof has been cleaned, you might want to do something to prevent the mold from coming back again. As I mentioned, copper, zinc and lead-coated sheet metal are toxic to algae, so installing a strip of flashing will help stop that nasty fungus in its tracks. Choose a strip that’s at least six inches wide, and have it installed at the roof peak to ensure that the metal molecules wash down with the rain and protect the roof from mold build up.

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.