Keep an Eye on Winter Energy Bills

Holiday lights, Christmas trees, and colder temperatures mean that December is usually one of the most expensive months in terms of utility bills. Add all of this to power company rates on the rise and you can see why it’s a great time to take a closer look at your energy usage. 

One resource that not enough people take advantage of is an audit by Energize Connecticut. For a fee, a home energy consultant will come to your home and conduct a full assessment, covering your furnace and water heater, air ducts, windows, doors, and more. Plus they can offer rebates for upgrades and repairs. To apply, visit the EnergizeCT website and choose your service provider. 

If you’re not interested in an assessment but would still like to enjoy some serious home energy savings, here are the top five spots I always check for air leaks and heat loss. 

1. Windows. Believe it or not, hanging heavy fabric drapes can help you retain up to 25% of the heat in your home. This is especially true with large glass doors that aren’t being used in the winter months. Also, be sure to check for gaps. Wooden window frames get warped with age and can lead to serious air leakage. For cracks that are smaller than a quarter of an inch, a silicone caulk will work to plug up areas where heat is escaping. Also, if you feel air coming right through your single panes and the glass rattles with the wind, beef them up with some shrink film. This product can be found at any home supply store and can be cut to size. 

2. Doors. We don’t often open the windows in the winter, but doors are a different story. They let lots of air escape, but they can’t be sealed completely because we need to use them. I always suggest inspecting your door sweep to ensure it’s not damaged and replacing it if the bristles have come loose. A door snake or seal can also come in handy, which can be purchased at any big box store or even made at home with an old pair of stockings and some rice, beans, newspaper or another filling.

3. Attic. Those of you with an attic hatch are likely losing a ton of warm air through its frame. We all know that hot air rises, so seal up that hatch with heavy duty plastic, or build yourself an insulated box to fit over the entryway if you still need access to storage. 

4. Water Heater. Insulate your water heater’s tank and pipes with fiberglass. For the tank, fit a fiberglass blanket using foil tape, but be sure not to cover any valve or pipe openings. For the pipes, you can use fiberglass wrap or foam insulation. By adding a layer of insulation to your water heater, you’ll keep the warmth from escaping into the air and you’ll protect the machine from condensation in the summer months. 

5. Insulation. Most homes simply do not have enough insulation in the walls and attic, which is probably the number one contributor to sky-high energy bills. Insulation acts as a barrier against heat flow, helping to keep the warm air inside the house by slowing the flow and stopping the heat from getting outside. The United States Environmental Protection Agency says that with proper insulation, the average home in our area can save approximately 16 to 50 percent in total heating and cooling costs depending on the age and condition of the home. Plus it’s one of the highest rated home improvements in terms of real estate resale value. 

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro”. All questions may be considered for publication. To contact Bob for your remodeling needs, call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.

Say So Long to Solar Panels with This Latest Invention

You’re probably familiar with Tesla, the luxury car company that made a name for itself by introducing solar energy cars to the market. Now, Tesla CEO Elon Musk has turned his attention to a different use for solar energy by announcing the launch of solar shingles which officially went on sale last week. So if you’ve been considering solar energy for your home but don’t like the look of massive panels stuck to your roof, this game changer might just be the solution you’re looking for.

If you know anything about Tesla cars, you know that they aren’t cheap and neither is the new solar roof. Installation on an average 1,800 square foot house will set you back more than $68,000, but Tesla estimates that over the roof’s 30-year life span, the solar shingles will generate over $88,000 in energy production. The 30% federal tax credit, known as the Solar Investment Tax Credit, will be available for the product and can be applied to the cost of the solar portion of the roof as well as the cost of the required Powerwall battery. Based on that percentage for this example, you’d be looking at a tax credit of $20,000 which, according to the company, brings you to around $40,000 in net earnings over the 30 year period.

The roof configuration is made up of both solar and non-solar panels, with Tesla recommending a 60-70% ratio of solar to non-solar units depending on the individual home. Unlike those unsightly solar panels we’ve come to accept as the best way to harness energy from the sun, solar roofs look very similar to a regular roof with both textured and smooth panel options which are approximately the same size as a regular roof shingle. Units designed to mimic the look of slate and Tuscan style terra cotta will both be launched in 2018.

But with our brutal seasons, will these new glass panels really be able to stand up to the weather? Tesla says yes and has given the product an infinity warranty based on the lifetime of the house. The panels also get the highest rating for wind, hail, and fire damage.

So when might you be able to get your hands on a solar roof? Tesla says they’ll begin installations in California starting in June, with a nationwide rollout planned to follow. While we aren’t sure when the product will be available yet in this area, I’m interested to know if it’s something homeowners here would want to know more about. Does a solar roof pique your curiosity? I’d love to know more. Message me on Facebook to tell me what you think at www.facebook.com/odonnellbros.

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.

Go Green with Energy Efficient Windows

Energy efficiency is continuing to gain popularity as more and more people are making the conscious decision to take environmental matters into their own hands. As I visit homeowners and talk to them about their options, I’m excited to report that people are taking proactive measures to reduce their carbon footprint, often asking me for my advice on ways to make their home a place that’s friendlier to our planet. One of the first suggestions I often make, in addition to ensuring they have proper insulation, is replacing old windows with a modern, energy efficient option.

Here in the Bristol area, many of the 1950’s home have old, drafty aluminium windows that let tons of heat and air conditioning escape during the winter and summer months. These old windows are expensive to keep in the house because they let so much air pass through. This means that homeowners (especially seniors who are more sensitive to the temperature,) are constantly cranking up or down the dial to make the house more comfortable.  It’s a lot of money and energy wasted for no good reason. 

These days, many window and door products are certified by EnergyStar, a joint program developed by the U.S. Environmental Protection Agency and the U.S. Department of Energy to help consumers better understand the benefits of using energy efficient products and appliances. But what makes a window energy efficient in the first place? There are a few components, and different manufacturers use different options based on the environment and climate where the windows are sold.  

Firstly, the frame will be made of high-quality materials (such as fibreglass, vinyl, or wood) that are durable and reduce heat transfer. Then there is the glass, which should be at least two panes, separated by a gap to absorb sound and provide a stronger barrier between the inside and outside. In addition to multiple panes, the glass will also often have a Low-E (or low emittance) coating, which makes the window more effective in diminishing heat transfer, and reduces ultraviolet light from entering the home, which can damage carpets, rugs, and fabric furniture.  These three important factors are key to ensuring hot and cold air stays where it belongs, depending on the time of year. Plus I love a window with a tilt-in sash, which makes cleaning both the inside and outside of the glass a breeze.

It’s important for us all to help the environment, and creating an energy efficient home is a great way to do your part while reducing your power bill at the same time. If you’re not sure which windows are right for you, talk to a professional or visit energystar.gov to get more information on the options available.