Keep Energy Bills Down In Winter With These Tips

Outdoor lights, Christmas trees, and colder temperatures mean that December is usually one of the most expensive months in terms of utility bills. But with the holiday season behind us, January is a great time to take a closer look at how much energy you’re using and address the issues in your home that are causing those high costs. 

One resource that not enough people take advantage of is an energy audit by Energize Connecticut. For a fee, a home energy consultant will come to your home and conduct a full assessment, covering your furnace and water heater, air ducts, windows, doors and more. Plus they can offer rebates for upgrades and repairs. To apply, visit the EnergizeCT website and choose your service provider.

If you’re not in the market for an assessment would still like to enjoy some serious home energy savings, here are the top five spots I always check for air leaks and heat loss. 

1. Windows. Believe it or not, hanging heavy fabric drapes can help you retain up to 25% of the heat in your home. This is especially true with large glass doors that aren’t being used in the winter months. Also, be sure to check for gaps. Wooden window frames get warped with age and can lead to serious air leakage. For cracks that are smaller than a quarter of an inch, a silicone caulk will work to plug up areas where heat is escaping. Also, if you feel air coming right through your single panes and the glass rattles with the wind, beef them up with some shrink film. This product can be found at any home supply store and can be cut to fit any size. 

2. Doors. We don’t often open the windows in the winter, but doors are a different story. They let lots of air escape, but they can’t be sealed completely because we need to use them. I always suggest inspecting your door sweep to ensure it’s not damaged and replacing it if the bristles have come loose. A door snake or seal can also come in handy, which can be purchased at any big box store or even made at home with an old pair of stockings and some rice, beans, newspaper or another filling.

3. Attic. Those of you with an attic hatch are likely losing a ton of warm air through its frame. We all know that hot air rises, so seal up that hatch with heavy duty plastic, or build yourself an insulated box to fit over the entryway if you still need access to storage. 

4. Water Heater. Insulate your water heater’s tank and pipes with fiberglass. For the tank, fit a fiberglass blanket using foil tape, but be sure not to cover any valve or pipe openings. For the pipes, you can use fiberglass wrap or foam insulation. By adding a layer of insulation to your water heater, you’ll keep the warmth from escaping into the air and you’ll protect the machine from condensation in the warmer months. 

5. Insulation. Most homes simply do not have enough insulation in the walls and attic, which is probably the number one contributor to sky-high energy bills. Insulation acts as a barrier against heat flow, helping to keep the warm air inside the house by slowing the flow and stopping the heat from getting outside. The United States Environmental Protection Agency says that with proper insulation, the average home in our area can save approximately 16 to 50 percent in total heating and cooling costs depending on the age and condition of the home. Plus it’s one of the highest rated home improvements in terms of real estate resale value. 

Happy New Year Everyone! Here’s to a warm, happy and healthy 2020!

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro”. All questions may be considered for publication. To contact Bob for your remodeling needs, call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.

10 Hacks To Make Window Washing A Little Less Painful

This past weekend my family tackled the tough job of cleaning the windows in my daughter’s recently purchased historical home. After years of built-up dirt, this was no easy task and let me tell you, it made me appreciate my easy to clean vinyl windows a whole lot more. But with a house in a historic district, efficiency upgrades aren’t as simple as they are with other homes, so a morning of cleaning was inevitable. Luckily, with a few simple tricks, we got the job done and the windows look amazing. 

Window washing is a dreaded task, but a few hours can make all the difference. Here are 10 of my favorite tricks, tips, and hacks to simplify the job and get your glass gleaming again.

1. Never clean windows on a hot day. The glass will heat up, causing your washing solution to dry on the panes faster than you’ll be able to wipe it off. A cloudy, overcast day is your best bet for this job. 

2. Instead of relying on reams of paper towels, stop into your local hardware store and grab an eight-inch squeegee for those small panes. They make the job a lot easier with much less waste, just don’t forget to wipe the blade between swipes!

3. Here is a great DIY window cleaning solution. Combine one cup hot water and one cup white distilled vinegar. Mix in a spray bottle and there you have it. For very grimy windows, clean with hot soap and water first, followed by the vinegar mixture for a streak-free shine. 

4. To get rid of really pesky streaks, use a dry board eraser. Unlike paper towels, an eraser can do away with streaks without leaving lint behind. 

5. If you really hate washing windows, take an extra step and apply a window protectant. The clear polymer coating will help protect the glass from dust, dirt, and grime for longer. 

6. If you’ve run out of paper towels, old newspapers are a great alternative. The ink will get on your hands but you don't have to worry about lint getting left behind on the windows.

7. Hard water spots can be tough to remove with regular window cleaner. A dryer sheet will do the trick, just buff in circular motions. It works on mirrors and shower doors too. 

8. Caterpillars love building nests in window tracks. Clean them out with a thin screwdriver and then follow up with a firm, toothbrush-sized bristle brush. 

9. Hate cleaning blinds? Wrap a pair of kitchen tongs in two microfiber cloths and secure with an elastic band on either side. Run the tongs between each slat to remove dust and pet dander. 

10. Have a can of WD-40 in the garage? A quick coat on freshly cleaned window sills will prevent dirt and grime from sticking.

If after this round of window washing you swear it will be your last, consider upgrading to vinyl windows. The seamless, tilt-in design makes them so easy to clean and the energy efficiency can’t be beaten. It’s one of the best upgrades you can make to your home to save both time and money in the long run. 

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.

Replacement Windows for Less Maintenance and Energy Efficiency

If you swore that this past winter would be the last time you’d put up with drafty, old aluminum windows, this week’s column is for you. Around this time of year, I get calls from lots of people looking for advice and information on replacing their windows. Not only do old windows let lots of warm air out and cold air in, but they are also difficult to clean and maintain.

These days, many people are looking to replace their aluminum windows and sliding doors with a more durable option - something made from vinyl, wood or fiberglass that can withstand the test of time. There are lots of options out there and the one you pick will be based on four very important factors: the climate where you live, the amount of moisture and condensation your home is prone to, the kind of aesthetic you want for your home, and the maintenance required to keep them looking great. Keeping these four deciding features in mind, let’s go through the options.

When it comes to temperature, aluminum conducts heat and cold, which is why it’s a popular choice for cookware. Aluminum windows and doors are notorious for transferring the outside temperature in, which makes them very inefficient in both the winter and the summer. Wood fares better in the extreme seasons, but vinyl and fiberglass windows and doors are made for all weather and are built specifically to keep the warm air in and the cold air out. Remember that only 10 percent of the window is the frame, so investing in double pane energy efficient glass is your best option, no matter what frame you go with.

With our humid summers and damp winters, moisture is a major factor in deciding whether to upgrade your old windows and doors. Because aluminum transfers heat, it can attract condensation and moisture, which can lead to leaks, mold buildup, and rot inside your wall. The mold build-up I see around old windows would scare the life out of you, especially when you remember that you’re breathing those spores in every day! If you have signs of mildew or corrosion from your aluminum frames, it’s time to get them replaced.

Then there is the “look and feel” factor. Many people started replacing their aluminum windows and doors with vinyl so they could achieve a more contemporary look with the various finishes and designs that vinyl offers. Of course, aluminum products can be painted or powder coated to match the style of your home, but there will be maintenance to keep them looking great.

That brings us to upkeep. Be aware that any painted product will begin to chip and peel over time. The look of wood is elegant and timeless but it requires regular painting or staining, just like aluminum. Vinyl and fiberglass are very easy to care for and they don’t peel, fade or need to be repainted. These products are not prone to scratches, dings or dents and can give you a longer, hassle-free lifespan if you take care of them properly.

With summer in full swing, now is a good time to think about replacing old windows and doors for products with maximum energy efficiency and minimal maintenance. If your home still has aluminum and you’re experiencing some of the problems I’ve mentioned, it might be time for an update.

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.